Commonly used plate heat exchanger gasket types are EPDM, NBR, HNBR, VITON and so on. Because the field of application of plate heat exchangers continues to expand, there are different requirements for temperature, pressure and erosion resistance for different media and processes. It is obviously impossible to use a "universal" gasket to adapt to all situations, but different materials should be used for different situations. The cross-sectional shape of the commonly used gaskets is hexagonal. M & C teaches you how to replace the gasket of the plate heat exchanger?

Replacement should be performed in the following order.
1. Remove the waste gasket. When disassembling, be careful not to make scratches in the gasket groove.
2. Put the clean new gasket on the board.
3. Use a clean cloth or cotton yarn to clean the gasket groove and gasket.
4. The plate with the gasket attached should be placed in a flat, cool and ventilated place and dried naturally before installation.
5. Apply the adhesive evenly to the gasket groove.
The gasket of the plate heat exchanger should be replaced in time if leakage, breakage, aging and other phenomena occur during use.