The heat exchange unit is equipped with a stainless steel filter back-blowing purification device, a decontamination effect will be better, and its life will be longer. What should you pay attention to before starting a heat exchange unit with complete configuration, easy installation and energy saving? The editor of Axon will give you an introduction below.
1. Switch the heat exchange unit system to winter heating mode, that is, close the inlet valve and outlet valve of the refrigerator, and open the inlet valve and outlet valve of the heat exchange unit.
2. Turn on the pump and plate of the heat exchange unit, and replace the front and rear butterfly valves to ensure smooth secondary water circulation. Close the steam shut-off valve and open the front and rear shut-off valves of the steam trap to ensure that the condensate can be discharged smoothly.
3. Check whether the display of each instrument of the heat exchange unit is normal, including pressure gauges, thermometers, sensors, etc.
4. Check whether the heat exchange unit system is full of water and confirm whether the hydrostatic pressure of the system is normal.
The above points are the aspects that should be paid attention to before starting the heat exchange unit. If you want the heat exchange unit to better serve us and improve work efficiency, then you must pay attention to the above issues before starting up, and finally the heat exchange unit Do the maintenance work well.
