 |
In the entire boiler heating system, the heat source is a boiler, the power source is a water pump, the heat exchange equipment is a plate heat exchanger, the water supply and pressure equipment is a water supply pump, and the water tank is a water treatment system that serves to store demineralized ... Read More
|
| |
The characteristics of the plate heat exchanger are obvious compared with other heat exchangers: the plate heat exchanger has a high heat transfer coefficient, a small footprint, a compact structure and easy maintenance. Under the condition of equal heat transfer, the occupied space is only 1/2 ～ 1... Read More
|
| |
Replacing the gasket of the plate heat exchanger is not a very simple matter. Usually, if the operation method is not appropriate, the problems of leakage and liquid stringing of the plate heat exchanger will appear. Today we will introduce the heat exchanger to everyone. Matters needing attention ... Read More
|
| |
Thousands of miles of embankment, collapsed in the ant den. Every system in a ship is interconnected in some way. For ships that need to sail for a long time at sea, a small equipment failure may cause a series of fatal problems that seriously threaten the safety of the ship and crew . The heat ... Read More
|
| |
Where can heat exchangers be used on ships? Thousands of miles of embankment, collapsed in the ant den. Every system in a ship is interconnected in some way. For ships that need to sail for a long time at sea, a small equipment failure may cause a series of fatal problems that seriously threaten the ... Read More
|
| |
The heat transfer performance of heating clear juice with a plate heat exchanger is more than double that of the tube type, so the heat transfer area used can be reduced by half or more. Here it is better to use the first effect juice steam, which has a certain energy saving effect (than heating ... Read More
|
| |
1. Before disassembling the plate heat exchanger, the compacted length of the plate bundle should be measured and recorded. 2. If the gasket is stuck in the groove between the two plates, you need to carefully separate it with a screwdriver. The screwdriver should be inserted from the easily peeled ... Read More
|
| |
Titanium is usually the first choice for seawater cooling heat exchangers, because titanium has excellent corrosion resistance even in aerated seawater, and has high strength and low density. This means it can resist reducing or oxidizing environments, with or without chlorides, and temperatures up ... Read More
|
| |
Plate heat exchanger rubber gaskets are divided into two types of unilateral flow and diagonal flow according to their heat transfer medium flow. Correspondingly, plate heat exchanger seals are divided into single side flow and heat transfer medium flow Two kinds of diagonal flow. The heat exchange ... Read More
|
| |
In the diesel engine cooling system, the plate central cooler is an important cooling terminal in the cooling system, such as air cooler, oil cooler, high temperature fresh water cooler, central cooler, etc. The effect of oil and other fluid medium temperature. The high-temperature and low... Read More
|
